Results 1 to 16 of 16
-
01-02-2013, 07:21 PM #1
Attack on Willow Springs Raceway II (Big Track)
Attack on Willow Springs Raceway II (Big Track)
A big thank you to Extreme Speed Track Events for putting on the "Attack on Willow Springs Raceway" event last month. They will be hosting another event on February 3, 2013 for us but this time on the 2.5 mile "Big Track" at Willow Springs. This is a great opportunity to get a feel for what goes on in a HPDE (High Performance Drivers Education) event.
When:
February 03, 2013
Sunday 8:00AM
Where:
Willow Springs Raceway
3500 75th Street West
Rosamond, CA 93560
Entrance Fee:
$10/person gate fee (charged by Willow Springs Raceway).
___________________ EVENT SIGN-UP ___________________
If you are interested in attending please reply to this thread with the year/make/model of your vehicle.
By signing up you'll be getting:
- Free limited time lead-follow session on track behind an instructor. (DOT approved helmet required, rentals will be available at the track).
- Free raffle ticket for a chance to win over $500 in prizes (track days, shirts, digital tire pressure gauges, etc.).
NOTE: This event is not a "free" track day. To run the track the whole day you'll need to buy a track session (see Track Rental Info below).
________________ EVENT E-MAIL NOTIFICATION ________________
Send an e-mail to [email protected] to be included in the e-mail notification list.
__________________ TRACK RENTAL INFO __________________
If you want to register to run the track the whole day (includes free timing, free lunch, free basic instructions, and free raffle drawing) with Extreme Speed Track Events please e-mail me at w203fan@gmail for details on getting a discount.
-
01-02-2013, 09:06 PM #2
Hmmm, will try and get the day off.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-02-2013, 11:54 PM #3
-
01-08-2013, 01:26 PM #4
_______________________________ EVENT E-MAIL REMINDER _______________________________
PM me or e-mail [email protected] if you would like to receive e-mail reminder about the event.
-
01-12-2013, 01:31 AM #5
ATTENTION: Extreme Speed Track Events is offering limited free sessions of autocrossing to our event, this is in addition to the limited free lead-follow sessions.
Extreme Speed Track Events is also offering us huge discounts to run the whole day at the "Big Track", e-mail [email protected] for details.
To sign-up for the event just reply to this thread.
Event sign-up as of 01/11/13:
10' EVO X
02' A4 Quattro
06' 350Z
06' Impreza
08' A5
10' Cobalt SS
06' Noble M400
06' Murcielago
04' Murcielago
08' CL65
98' Corvette
08' 535i
97' Viper RT/10
13' Porsche TTS
08' Porsche GT2
02' CLK55
01' Integra GSR JDM
98' CLK320
04' G35
07' Mustang GT/CS
08' Mustang Shelby GT
10' 370Z
97' NSX
11' A4
08' M5
-
01-12-2013, 03:02 AM #6
I'm in 100% when and where do I pay you brotha.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-13-2013, 01:08 AM #7
-
01-18-2013, 09:22 PM #8Member
- Join Date
- Aug 2012
- Posts
- 184
- Rep Points
- 45.1
- Mentioned
- 12 Post(s)
- Rep Power
- 0
Just completely fried my stock brakes at Big Willow last Saturday at SpeedVentures. Now I need to hobble along until my BBK arrives later in January. I'd love to go but I'm probably a game-time decision.
-
01-18-2013, 09:43 PM #9
-
01-19-2013, 11:07 AM #10Member
- Join Date
- Aug 2012
- Posts
- 184
- Rep Points
- 45.1
- Mentioned
- 12 Post(s)
- Rep Power
- 0
What's up Sticky.
I ordered the Stop Tech 6-piston front (380mm) and 4 piston rear (365mm). Red calipers with cross-drilled rotors, pads and SS lines. Malek @ MRF Engineering got me a better price than the forum sponsors - $5K even (no shipping or tax) and will do a fantastic install like he does everything else.
It was a few grand cheaper than the equivalent Brembos and it's much easier to change pads with the Stop Techs (need to remove the entire caliper to change pads on the Brembos) and there are a lot more pad options with the Stop Tech's as well. Seems like a no brainer for someone more interested in "Go" than "Show"...acknowledging the Brembos may look better.
The Stop Tech rears are also lighter than the stock brakes and so as you know less unsprung weight will help acceleration as well.
-
01-19-2013, 02:17 PM #11Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-19-2013, 03:31 PM #12Member
- Join Date
- Aug 2012
- Posts
- 184
- Rep Points
- 45.1
- Mentioned
- 12 Post(s)
- Rep Power
- 0
I dunno but that would be awesome! I was only hoping the StopTech's would provide equal braking power and more importantly, equal heat dissipation as the Brembo's for less $$$...which is the biggest benefit of the BBK at the track. With my pathetic stock single caliper brakes, I warped the rotors at each track event and had to pay a few hundo$$ to cut them true each time. Now I have no more to cut...so it's on to the BBK. Weren't you at Big Willow in late December as well?
-
01-19-2013, 05:27 PM #13
-
01-19-2013, 09:35 PM #14Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-22-2013, 12:10 AM #15
How many spots are still open? I would like to attend with my C BS but will be a last minute decision based on if mods at Weistec are completed or not. Love the Big track, been out there with my CLK BS once.
1000+WHP WEISTEC 2008 CLK63 Black Series
790WHP WEISTEC 2012 C63 Black Series
725WHP WEISTEC 2014 SLS Black Series
-
01-28-2013, 02:12 PM #16
This is my last update for the event, we're less than 1 week out. If you have any questions/concerns please e-mail me at [email protected]
For those who want to run the track for $90 (regular price is $140) and this includes free basic instructions, free lunch, free raffle drawing, and free timing please use discount code willow33. Out of 90 spots 52 are taken, grab them while you can!
f30n55, we...
f30n55 is now here!