Dinan launches lightweight 20 inch forged performance wheels for the F10 M5 and F12/F13 M6

[Sticky]

The truth is most people buy wheels for their BMW for looks. They go for the largest rims possible not taking the weight or tire choices into account because appearance is what matters most of them. Those are not the people on this website and those are not the people at Dinan. Performance is what we are about and Dinan is catering to the performance crowd with a new set of lightweight wheels designed specifically for the F10 M5 and F12/F13 M6 with a custom offset.

This forged rims are 20x9.5 in front and 20x10.5 in back. The recommended tire size in front is 285mm wide which is an increase of 20mm over the stock 265. In back, the recommended size is 305mm also an increase by 20mm from the stock 285mm. These rims will allow one to increase the contact patch considerably all around without ruining the factory balance.

How much do they weigh? 22 pounds for the front and 23 pounds for the rear which is very light for a 20 inch rim.

Pictures below.

[onisyndicate]

I just don't like the D logo! but 22lbs and 23lbs rims are very nice!

[Sticky]

I just don't like the D logo! but 22lbs and 23lbs rims are very nice!

The centercap can be changed.

[leveraged sellout]

Not 100% sold on the looks but not bad. What do FIs weigh in this size? I think less.

[Sticky]

Not 100% sold on the looks but not bad. What do FIs weigh in this size? I think less.

I'm not sure if you can get a different finish but I would think so.

[klipseracer]

MORR VS7's were 19's and weighed 19.5lbs I believe. An extra inch of width and height makes up 3 pounds? I'm not really one to say.

[r45t4335i]

ummm, those are the Forgeline GA1R...

nvm, they announce the partnership on the forgeline blog.

[leveraged sellout]

Yeah I'm sure. The spoke design doesn't quite do it for me though. Not a bad look however. It's funny because for the longest time, I never liked the way Dinan wheels looked. Very plain, very understated. They didn't seem to fit BMW style language at all. However, I almost feel like they would have gone well on the F10. But they were heavy as hell compared to these.

[Sticky]

I always remember dinan wheels being light.

[deemo319]

The weight is nice, but they are ugly. Try again.

[Kidrobot]

A fat car will make any minimal wheel look ugly.

[Sticky]

The weight is nice, but they are ugly. Try again.

There's a certain beauty to function over form. I like them.

[ezec63]

Needs more concave

[BMDUB1]

I love them and the D logo..

[Sticky]

I love them and the D logo..

This guy likes the D...

[maxnix]

HRE forged a wheel in a very similar style for the Dinan S3 335i.

[undercover]

adv1 or hre for same money better looks!

not a dinan fan at all
max @undercover

[Sticky]

This wheel is about weight and tire sizes, not looks.

[Sticky]

HRE makes these guys.