Your file RFP OTS Stage 2.zip has been approved

anyone running these?

Originally Posted by 135iTX

anyone running these?

Just people that hate their engines.

curious what kind of boost and timing these are targeting

They're not locked so you could easily open them to see.

Stage 2 91 is 16-17 psi about 6* of advance 11.4 afr
93 about 17-17.5 psi and 7.5 of advance 11.7 afr
E40 is 18-18.5 psi and 12.5 - 13* of advance 12.446 target
If going of lambda 12.446 is perfect. Could lean it out to 12.6-12.7 to make more tq and power but that is on you. I have videos on YouTube you can check out how to do it

Originally Posted by langsbr

They're not locked so you could easily open them to see.

I don't understand why the critics don't simply do that.

Originally Posted by DeanerBeamer

Stage 2 91 is 16-17 psi about 6* of advance 11.4 afr
93 about 17-17.5 psi and 7.5 of advance 11.7 afr
E40 is 18-18.5 psi and 12.5 - 13* of advance 12.446 target
If going of lambda 12.446 is perfect. Could lean it out to 12.6-12.7 to make more tq and power but that is on you. I have videos on YouTube you can check out how to do it

None of these are setup for N20 TMAP are they? I'm not a "tunah" so I wanted to make sure I was looking at the right place. The Stage 3 doesn't have the custom MAP conversion values, if that's the right place to check, plus they are targeting 195 load. For that to be 20psi, I figured the TMap couldn't be scaled, or it would be in the 17x or 18x range.

post some links to your youtube wideos please

Its scaled to 1.5 Bar vs 1.28 stock scaling. Doesn't need n20 as the mathematics behind it 14.6*1.28=18.68 psi usable but the tmap goes to 1.5 so 1.5*14.6=21.9 psi usable (I think max range is like 22.26 if I am correct)
N20 works with 1.28 scaling and n20 in MHD sub folder below to break down load for higher boost aka above 22